Lipo Turnigy Nano Tech

Arrivage régulier de Lipo Turnigy Nano Tech 2S-3S-4S-6S

Produit dispo ici



Toute La Gamme de Produits FrSky Dispo en France

Module + Récepteur FrSky FF 2.4Ghz pour FUTABA

.

Module + Récepteur FrSky FJ 2.4Ghz pour JR

.

Module DFT + Récepteur FrSky D8R 2.4Ghz avec Télémétrie pour FUTABA

.

Module DJT + Récepteur FrSky D8R 2.4Ghz avec Télémétrie pour JR

.

Module DIY FrSky V8HT 2.4Ghz

.

Récepteur FrSky V8R4 – 4CH – 2.4Ghz

.

Récepteur FrSky V8R7-HV 7CH – 2.4Ghz

.

Récepteur FrSky V8FR-HV 8CH – 2.4Ghz

.

Récepteur FrSky D8R 8CH – 2.4Ghz avec Télémétrie

.

Détecteur de tension Batterie pour récepteur FrSky DR8

.

Convertisseur USB Vers TTL UART 6PIN Série pour Update FrSky DR8

Afficheur de tension Cell-Log 8S – Lipo 2S à 8S

Accurate cell voltage monitor for up to 8 cell battery packs. Voltage alarm configurable with over voltage and low voltage settings.
The CellLog 8S is pre-calibrated at the factory to ensure accurate cell voltage readings.
USB support for downloading cell data and software upgrade on the 16Mb flash memory.
Supports logview: www.logview.info
Specifications:
Lithium (LiPo/LiIo/LiFe) battery cell count: 2 8 series
Pack voltage range: 4.0 43.0VDC (USB can provide lower voltage 1.0V)
Alarm pack voltage range: 0.1 4.3VDC
Cell voltage range: 1.3 4.9VDC
Alarm cell voltage range: 1.3 4.9VDC
Voltage display resolution: 1mV
Current loading of test: 8mA
Maximum voltage for alarm port: 50VDC
Current drain for alarm port: <500mA
Log Files storage: 16Mbit (36 hours)
Sample logging time interval: 2 seconds
PC Connect: USB port
Weight: 18g
Dimensions (L X W X D): 62 X 39 X 12mm (2.44 X 1.53 X 0.47in)
Produit dispo ici


Servo Power HD DS65HB Digital 1.5kg

Spec.
Modele: Digital DS65HB
Type: Digital
Tension: 4.8~6v
Vitesse @ 4.8V: 0.09sec
Vitesse @ 6V: 0.07sec
Couple @ 4.8V: 1.3kg/cm
Couple @ 6V: 1.5kg/cm
Pignons: Plastique
Poids: 6.5g
Dimensions: 20.8x11x20mm
Temperature de stockage : -20~60C
Temperature fonctionnement: -10~50C

Produit dispo ici

Detecteur de tension Turnigy 3S-8S

Le détecteur de tension 3S a 8S Turnigy donnera un signal sonore d’avertissement ainsi qu une indication par LED pour High, Average, Below average, and Low tension de votre batterie Lipo. Il est très facile à utiliser, et ne pèse que 6g.

High  3.7V < V/cell
Average  3.4V < V/cell < 3.7V
Below average  3.25V < V/cell < 3.4V
Low voltages  V/cell < 3.25V

Protection inversion de polarité.
Tension de fonctionnement: 9V ~ 33.6V
Poids: 6g

Produit en stock  ici

Serviette de Banc de Travail Turnigy 100% Coton

Serviette de Banc de Travail Turnigy 100% Coton

Dimensions: 690x320mm

Lavable en machine.

Produit dispo ici

Servo HX 5010 Hextronik

HX5010

Dimensions: 40x20x38mm
Poids: 39g
Vitesse: .16sec/60Deg
Couple: 6.5kg a 4.8V
Couple: 6.9kg a 6V
Tension: 4.8~6v

Produit dispo ici

Méga adaptateur XT60, Traxxas, Tamiya, EC3 ou Deans T

Maintenant vous pouvez connectez vos XT60, Traxxas, Tamiya, EC3 ou Deans T-connector à tout type de batterie !
Un must pour tous ceux qui on un mélange de batteries LiPo.

Produit dispo ici

Chargeur ECO6 50W 5A Charge-Balance-Decharge

En stock ici

Afficheur de tension Cell-Log 8M – Lipo 2S à 8S

En stock ici